HPS - High Performance Street Brake Compound

Superior Stopping Power

HPS - High Performance Street disc brake pads are world renowned for increasing stopping power on your street legal vehicle. Increasing the performance of your vehicles braking system is easy when you choose Hawk Performance’s HPS braking compound. This unique Ferro-Carbon formula was developed for street performance using the safety and quality of Aerospace and Motorsports severe-duty friction technology.

The High Performance Street compound offers a higher coefficient of friction over stock brake pads and can provide you 20-40% more stopping power and higher resistance to brake fade than most standard replacement pads. Less fade means you will have a highly durable brake pad with less brake dust.

HPS Ferro-Compound Features:

Increased stopping power
High friction/torque hot or cold
Gentle on rotors
Extended pad life
Low dust
Virtually noise-free

All Hawk Performance High Performance Street brake pads provide a limited lifetime warranty, ensuring products to be free of defects from manufacturer’s workmanship and materials.

Note:
Hawk Performance burnishes its High Performance Street brake pads as a final step in the factory, but all brake pads have to be bedded-in with the rotors (new or used) that they will be used against. Properly bedding-in new brake pads results in a transfer film being generated at the pad and rotor interface to maximize brake performance.

Bed-in Instructions:

After installing new brake pads, make 6 to 10 stops from approximately 30-35 mph applying moderate pressure.
Make an additional 2 to 3 hard stops from approximately 40 to 45 mph.
DO NOT DRAG BRAKES!
Allow 15 minutes for brake system to cool down.
After step 4 your new pads are ready for use.

Year:: 2006/2007/2008/2009/2010/2011/2012/2013

Make:: Mazda

Model:: 3/6

Submodel:: Mazdaspeed 3/Mazdaspeed 6

Hawk Performance Limited Warranty

2 Reviews

4
good pads

Posted by Unknown on May 3rd 2013

I havnt been running these for long and I havnt raced with them on yet but in the few hundred miles that I have drove they feel good and don't put off too much dust.
4
Good Pads!

Posted by Tony Ho on Apr 19th 2013

At 60K, I replace the OEM pads with HPS pads on my speed3. OE pads have ~1/4 material left, could have change out the pads later. Bed-in the pads according to the instruction on box. Similar to other reviews of the pads, it has less initial bite. I think this is because the pads are cold. Once they are warm up (1-2 normal applications), they stops well. bring the car down to a haul with no fuss.They do dust, but definitely less than OE.