Ksport Kontrol Pro Fully Adjustable Coilover Kits provide the ultimate in suspension technology for your street or track car. 36 levels of damping adjustment allow you to fine tune the ride to your handling and comfort needs. The damping adjusts compression and rebound simultaneously for ease of adjustment. Pillow ball top mounts in the front and rear on some applications allow you to maintain vehicle manufacturer suspension geometry design. The pillow ball top mounts also allow you a more direct feel for solid driver response. Where available, camber canbe adjusted via the Pillow-ball Top Mounts, which means no additional "Camber Kits" are needed.
Most applications utilize an adjustable lower mount, which means you adjust height without losing suspension travel like some other coilover designs do. With the mounts and most pieces of the coilover being designed for 6061 billet aluminum the kit is lightweight, durable, and rust resistant. The steel shock body is electroplated with zinc to resist rust and the elements. The valving of each set is matched to the springs installed for unmatched ride quality and reliability.
The Ksport system uses a Monotube design in which the oil and gas are separated within the cylinder. When compared to twin tube designs the Monotube dissipates heat better, allows finer damping adjustments, and requires more expensive design process. Aeration and cavitation are a lot less common in a Monotube design, which results in a better ride.
The Ksport Kontrol Pro Coilover kit has been designed with professional road racing in mind offering extremely high value and performance.
Key Features
- 36 levels of adjustable damping
- Made from high quality 6061 aluminum with T6 for increased hardness
- Compression/Rebound adjustable
- Adjustable spring perch for height adjustment
- Adjustable body allowing maximum suspension travel
- Pillowball top mount with adjustable camber (not available for some models)
- Monotube high pressure design reduces oil leakage
- Electroplated body for protection from corrosion and rust
- One year limited warranty
The Mazdaspeed 3 specific kit features pillowball top mounts for the front and aluminum top mounts for the rear. Spring rates are as follows:
Front: 9 kgf/mm, 504 lb/in
Rear: 4.7kgf/mm, 263lb/in
- Year:
- 2010/2011/2012/2013
- Make:
- Mazda
- Model:
- 3
- Submodel:
- Mazdaspeed 3
4 Reviews
-
so so
there okay not badcustomer service was good this time around
-
Worth it
have a 2012 mazdaspeed 3 with a couple of mod also bought from this website like the cobb motor mount, turbosmart bov and shifter weight all products were shipped on time sealed in perfect conditions. now the k-sport coilovers was the best investment i made on my car starting from looks to performance. it drives like a stock car but on the height you want, amazing really satisfied with this product. its not bouncy at all obviously if you go on a bumpy road it will bouncy but nothing crazy! RECOMMENDED if anyone wants to check it out how it looks my instagram is Gui_Avila88
-
Very satisfied
These coilovers are perfect for the price. The way they adjust (by lengthening the coilover body, not adjusting the spring or changing the length of dampening) allow you to keep a stock like ride with the benefits of lowering the car. Installation is pretty straight forward, they do not have the top hats as shown in the photos, they have a 8 spot adjust-ability for camber in the front. You still need camber arms for the rear. Overall I am pleased with the price of the coilovers and would most likely purchase them again. If you check edgeautosports facebook wall, there is photos of my car (blue 2011 genpu) with the coilovers installed.
-
Good Product
These coilovers are very good. Comming from a volkswagen with FK coilovers the ride was very Bouncy and rough. I was very surprised at the ride quality of the Ksports. I installed them on my 2012 Mazdaspeed3. They are very smooth and not bouncy at all. The adjustable dampers and front camber plates are a plus!
