The JBR Hot Side Charge Pipe Kit for the Ford focus ST is constructed out of 2.5" mandrel bent aluminum. We used up all the available space and created a hot side charge pipe that increases the diameter by 26% over the OEM. This translates into a significant increase in air flow to get that hot air exiting the turbo to the intercooler faster and cooled quicker.
Making the connections are our custom, 5-ply reinforced silicone couplers. These couplers will not expand under boost and are fuel and oil resistant. Keeping the couplers and piping firmly in place, we've included 19mm wide stainless T-bolt clamps.
The end result is a kit that looks, fits and most importantly...Performs!!
Fitment:- Direct OEM replacement
- Fits all aftermarket turbos and intercoolers that are direct OEM emplacements
Features:- Designed and Manufactured in the USA
- Increased Air Flow
- Lower charge temps
Includes:- 1 Hot side charge pipe
- 2 silicone couplers
- 4 stainless T-bolt clamps
- Installation instructions are available in our support section
- Year:
- 2013/2014/2015/2016/2017/2018
- Make:
- Ford
- Model:
- Focus
- Submodel:
- ST
1 Review
-
JBR Hotside Charge Pipe
Fits right up. You may need to trim the silicone to fit your application, but it's easy. Put a dab of motor oil in the boots and it will slide right together. This gets rid of useless baffle in the factory pipe.
