PC - Performance Ceramic Brake Compound

Ultimate stopping power in an ultra-low dust, low noise ceramic compound!

Hawk Performance offers a premium, high performance, ultra-low dust, low noise compound called Performance Ceramic.

Performance Ceramic is engineered to reduce brake NVH (Noise, Vibration and Harshness), creating a quieter performing brake pad. Furthermore, the ceramic brake pad formula has a linear friction profile that allows your ABS brake system to work more effectively. With Performance Ceramic you can expect reduced brake pad wear, lower dust output levels and a rotor-friendly brake pad.

Performance Ceramic – quiet, clean & fast stopping!

• Increased stopping power
• Increased rotor life
• Extended pad life
• Ultra-low dust
• Extremely quiet
• Stable friction output

Recommended for import domestic automobiles, luxury SUV’s, sports trucks & vans.

Today’s alloy wheel designs on premium vehicles has contributed to customer demand for a low dust performance brake product. Specify Hawk Performance’s Performance Ceramic brake pads for your luxury car, SUV, or truck.

All Hawk Performance Performance Ceramic brake pads provide a limited lifetime warranty, ensuring products to be free of defects from manufacturer’s workmanship and materials.

Note:
Properly bedding-in new brake pads results in a transfer film being generated at the pad and rotor interface to maximize brake performance.

Bed-in Instructions:

1. After installing new brake pads, make 6 to 10 stops from approximately 30-35 mph applying moderate pressure.
2. Make an additional 2 to 3 hard stops from approximately 40 to 45 mph.
3. DO NOT DRAG BRAKES!
4. Allow 15 minutes for brake system to cool down.
5. After step 4 your new pads are ready for use.