Fuel System

Mazda OEM

Mazda OEM Injector Bracket Mazdaspeed 3 2007-2013 | Mazdaspeed 6 2006-2007

Mazda OEM Genuine Parts Only!  This is the injector bracket that secures the direct injection style injector to the cylinder head.  Sold individually.

AEM Electronics

AEM Water/Methanol Injection Filter

AEM’s Water/Methanol Injection Filter can filter particulates as small as 40 microns. It protects the working parts of the water/methanol system and the engine from particulates in the water/methanol mixture when installed in-line before the...

Mazda OEM

Mazda OEM Fuel Tank Pump Filter Assembly Mazdaspeed 3 2007-2013 | Mazdaspeed 6 2006-2007

Our Mazda OEM parts are Genuine Mazda Parts ONLY, straight from Mazda.If you're replacing your fuel pump, it's wise to replace the fuel pump filter as well. This is the factory OEM in tank fuel pump filter.

cp-e

cp-e FuelBAR Aux Fuel Rail Kit Ford Focus ST 2013-2018

Supplying fuel is key to achieving power consistently and safely. The FuelBar™ Ford Focus ST Aux Fuel Rail by Custom Performance Engineering, Inc. are milled from a solid block of 6061 aluminum and are engineered to optimize fuel delivery. The kit...

Stratified Xtra Fuel System Ford Focus ST 2013-2018

Stratified Automotive's Xtra Fuel System provides a COMPLETE solution for your auxiliary fueling needs in the Ford Focus ST 2.0 EcoBoost.  With direct injection, there are currently a lot of limitations with how much fuel you can ultimately inject...

Mazda OEM

Mazda OEM High Pressure Fuel Pump (HPFP) Mazdaspeed 3 2007-2013 | Mazdaspeed 6 2006-2007 | CX-7 2006-2012

Mazda OEM Genuine Part ONLY.  This is the Mazda OEM Cam Driven High Pressure Fuel Pump in all MZR DISI engines for all Mazdaspeed 3, Mazdaspeed 6, and CX-7 engines.

Mazda OEM

Mazda OEM Fuel Pressure Relief Valve Mazdaspeed 3 2007-2013 | Mazdaspeed 6 2006-2007 | CX-7 2007-2012

Mazda OEM Genuine Parts.  This is the fuel pressure relief valve for all Mazdaspeed 3, Mazdaspeed 6 and CX-7 models.  

cp-e

cp-e N54 Fuel Bar BMW N54 Models

Supplying fuel is key to achieving power consistently and safely. The FuelBar™ by Custom Performance Engineering, Inc. are milled from a solid block of 6061 aluminum and are engineered to optimize fuel delivery. The kit can be optioned to interface...

cp-e

cp-e SafeSeal Injector Seals with Puller Tool Mazdaspeed 3 2007-2013 | Mazdaspeed 6 2006-2007

In the high horsepower quest of the MZR 2.3 DISI, enthusiasts have hit many roadblocks. One of the strangest roadblocks faced was that increasing the horsepower meant increasing the cylinder pressure and as a result the load on the fuel injector seals...

Snow Performance

Snow Performance Stage 3 Boost Cooler Direct Injection Methanol Injection Kit

The all new Stage 3 Boost Cooler™ is the most advanced water-methanol injection system for your DI (direct injected/boosted) vehicle. The Stage 3 creates a 2D MAP based off of boost/fuel pressure sensor voltage to progressively command 2...

Mazda OEM

Mazda OEM HPFP Fuel Rail Line Mazdaspeed 3 2007-2013 | Mazdaspeed 6 2006-2007

This is a Mazda OEM Genuine Part for the fuel rail feed line, connecting the high pressure fuel pump to the fuel rail.

Aeromotive

Aeromotive Top Feed Fuel Rail System Subaru WRX 2002-2014 | WRX STI 2007-2014

Aeromotive Top Feed Fuel Rail System Part NumberAER 14135 Vehicle FitmentSubaru WRX 2002 - 2014 / STI 2007 - 20014 Product Description Aeromotive's fuel rail system provides you with a custom engineered installation soltuion. They feature custom...

Cobb Tuning

Cobb Tuning Fuel Pressure Regulator Kit Subaru WRX STI 2008-2019

The Cobb Subaru 08+ STI Fuel Pressure Regulator Kit is a plug-and-play solution that is simple and easy to install. It requires no cutting of factory hoses and is multi-fuel compatible. This kit includes the fuel pressure regulator manifold reference...

ATP Turbo

ATP Turbo Bosch 545cc Fuel Injector Hyundai Genesis Coupe 2.0L 2010-2012

ATP Turbo

ATP Turbo Injector Adapter Wire Hyundai Genesis Coupe 2.0L 2010-2012

ATP Turbo

ATP Turbo Fuel Return Adapter Fitting Hyundai Genesis Coupe 2.0L 2010-2012

AEM Electronics

AEM V2 Water/Methanol Injection Kit Internal Map, Tank Included

THIS PRODUCT MAY BE USED SOLELY ON VEHICLES USED IN SANCTIONED COMPETITION WHICH MAY NEVER BE USED UPON A PUBLIC ROAD OR HIGHWAY, UNLESS PERMITTED BY SPECIFIC REGULATORY EXEMPTION (VISIT THE “EMISSIONS” PAGE AT HTTP://WWW.SEMASAN...

AEM Electronics

AEM V2 Water/Methanol Injection Kit Multi Input, Tank Included

THIS PRODUCT MAY BE USED SOLELY ON VEHICLES USED IN SANCTIONED COMPETITION WHICH MAY NEVER BE USED UPON A PUBLIC ROAD OR HIGHWAY, UNLESS PERMITTED BY SPECIFIC REGULATORY EXEMPTION (VISIT THE “EMISSIONS” PAGE AT HTTP://WWW.SEMASAN...

AEM Electronics

AEM V2 Water/Methanol Injection Kit Multi Input, No Tank

THIS PRODUCT MAY BE USED SOLELY ON VEHICLES USED IN SANCTIONED COMPETITION WHICH MAY NEVER BE USED UPON A PUBLIC ROAD OR HIGHWAY, UNLESS PERMITTED BY SPECIFIC REGULATORY EXEMPTION (VISIT THE “EMISSIONS” PAGE AT HTTP://WWW.SEMASAN...

NRG Innovations

NRG Innovations Fuel Pressure Regulator Connector Subaru

NRG Innovations Fuel Pressure Regulator Connector Part NumberFRG-SBU Vehicle FitmentSubaru Product DescriptionNRG Innovations makes a variety of awesome modifications that make your car stand out from the rest in both style and performance.  From...

Snow Performance

Snow Performance Stage 3 Gasoline Boost Cooler Upgrade (Discontinued)

Already have a Snow Performance Stage 2 gasoline Boost Cooler™? Snow Performance offers you the option to upgrade just the controller to make your Stage 2 system into a Stage 3. Extremely easy to set up and dial in - the software creates a...

Snow Performance

Snow Performance Union T

1/4" OD tube-to 1/4" OD tube-to 1/4" OD tube.

Snow Performance

Snow Performance Low Level Indicator

Low level indicator – Keeps track of low fluid level for. The indicator switch upgrade includes an LED and an EZ installation grommet for use with any Boost Cooler® reservoir. #40035 is unmounted and can be added to any plastic reservoir...

Snow Performance

Snow Performance Nozzle Holder Elbow

1/8" NPT to 1/4" OD tube.

Snow Performance

Snow Performance Bulkhead Fitting

1/4"OD tube-to 1/4"OD tube. Enables a quick connect outlet for our tubing when using your own reservoir.

Snow Performance

Snow Performance Nozzle Mounting Adapter

Need a way to mount your injector nozzle into your silicone or rubber intake tube? Snow Performance now offers a Nozzle Mounting Adapter for those without metal intake tubes. Made from Delrin, the adapter is methanol resistant and highly durable...

Snow Performance

Snow Performance Nozzle Mounting Bung

New SafeInjection™ flow gauge to display water-methanol flow in ml/min in real time. For use with the new #30020 redesigned Safe Injection™ unit. This 2 1/16" (52mm) gauge has a digital display that reads flow so you can know exactly how...

Snow Performance

Snow Performance Dual Nozzle Upgrade

This allows an additional nozzle to be mounted in any of our Boost Cooler™ kits. It includes a Tee junction piece with our quick-connect fittings, a nozzle holder and a section of hose. Note – injector nozzle is not included. Mounting...

Snow Performance

Snow Performance 2.5 Gallon Tank

The new 2.5 Gallon Reservoir gives much more range than the included 3 qt tanks, and is fairly small in size – 13”l x 9.5”h x 7.5”w (similar to a very small car battery) and includes mounting straps, an additional 15 feet of...

Snow Performance

Snow Performance 7 Gallon Reservoir

Snow Performance now has a new 7 Gallon Reservoir available for those looking to maximize the range of the Boost Cooler water/methanol injection system. The new 7 Gallon Reservoir (#40016) offers a larger fluid capacity but in a nice, compact design...

Snow Performance

Snow Performance Meth/Water Injection Solenoid Upgrade

Shut off solenoid is used when mounting the injection nozzle lower than the reservoir or the reservoir is rear-mounted to prevent gravity flowing. It is also used to prevent siphoning when the injection nozzle is mounted after the throttle body or...

AEM Electronics

AEM V2 Water/Methanol Injection Kit Internal Map, No Tank

THIS PRODUCT MAY BE USED SOLELY ON VEHICLES USED IN SANCTIONED COMPETITION WHICH MAY NEVER BE USED UPON A PUBLIC ROAD OR HIGHWAY, UNLESS PERMITTED BY SPECIFIC REGULATORY EXEMPTION (VISIT THE “EMISSIONS” PAGE AT HTTP://WWW.SEMASAN...

Aeromotive

Aeromotive Fuel Rails Subaru WRX 2002-2014 | WRX STI 2007-2014

These rails are built from 6061-T6 aircraft quality aluminum with bright red anodizing. These rails are a direct bolt-on installation to the stock intake manifold. - Flow-through, top feed design eliminates hydraulic fluctuation. - Plated steel...

Deatschwerks

DeatschWerks Fuel Pump Install Kit Mitsubishi Evolution 2003-2006

The Deatschwerks EVO/DSM Fuel Pump installation kit includes a new fuel pump filter, fuel pump insulator and o-rings. This makes installing the DW301 in your EVO/DSM a breeze.

Walbro

Walbro Installation Kit Mitsubishi Evolution 2003-2006

The Walbro Mitsubishi installation kit includes a new fuel filter, new rubber stop, a new o-ring and some new plastic washers. Makes installation of the Walbro GSS342 into the Mitsubishi EVO/DSM very quick and easy.

Snow Performance

Snow Performance Stage 2 Boost Cooler Methanol/Water Injection System

This kit uses manifold boost pressure to determine when and how much fluid to inject. Proportionally injecting according to boost pressure gives the most accurate delivery of water-methanol and allows the most cooling and performance improvement over the...