Radium Engineering

Radium Engineering

Radium Engineering 6AN Orb Swivel Banjo To 6AN Male 20-1000-0606

This low profile swiveling fitting screws into a 6AN ORB port and has a 6AN male at 90 degree angle. Safe for use with all types of fluid. Constructed of stainless steel and aluminum.

Radium Engineering

Radium Engineering 4An Orb Swivel Banjo To 8.5mm Barb 20-1000-0485

Swiveling fitting. Stainless steel and aluminum construction. Suitable for most fluids.

Radium Engineering

Radium Engineering 4An Orb Swivel Banjo To 6.5mm Barb 20-1000-0465

Swiveling fitting. Stainless steel and aluminum construction. Suitable for most fluids.

Radium Engineering

Radium Engineering 4An Orb Swivel Banjo To 6AN Male 20-1000-0406

Stainless steel and aluminum construction. Swivels 360 degrees after installation. Compatible with most fluids.

Radium Engineering

Radium Engineering 10AN Male Press-Fit Honda K-Series 20-0909

Press-in valve cover breather fitting. Features a 10AN male 360 degree swiveling fitting. Compatible with all K-series valve covers that have the press-in (not cast) nipple.

Radium Engineering

Radium Engineering Fuel Level Sender Adapter Fa20 20-0850

This kit is needed when using Radium in-tank fuel pump hangers on any 2015-2021 Subaru WRX with the FA20 engine.

Radium Engineering

Radium Engineering Hose Separator Clamp 2-Way Threaded 20-0817

Single clamp with two positions. Anodized aluminum.

Radium Engineering

Radium Engineering 10AN Male Press-Fit Rb25Det intake And Exhaust 20-0813

This fitting presses into the Nissan RB25DET valve cover and will work on either intake or exhause side. Presents a swiveling 10AN male fitting for connecting a hose to.

Radium Engineering

Radium Engineering 10AN Male Press-Fit Sr20Det S14/S15 Exhaust 20-0812

Press-in valve cover fitting for the Nissan S14/S15 SR20DET. Exhaust side. 10AN male connection.

Radium Engineering

Radium Engineering 10AN Male Press-Fit Sr20Det S13 Exhaust 20-0811

Press in valve cover fittings for the Nissan S13 SR20DET (red and black top). Exhaust side. Double sided 10AN male connections.

Radium Engineering

Radium Engineering 10AN Male Press-Fit Ka24De intake 20-0810

Press-in fitting breather fitting for the Nissan KA24DE valve cover. 10AN male swivels 360 degrees. Stainless steel and aluminum construction.

Radium Engineering

Radium Engineering 12AN Male Press-Fit Rb26Dett intake And Exhaust 20-0809

Press-in swivel fitting with 12AN male. For use on the Nissan RB26DETT engine valve covers.

Radium Engineering

Radium Engineering 10AN Male Press-Fit Rb25Det Sr20Det S14/S15 intake 20-0808

This stainless steel and aluminum fitting presses into the S14/S15 Nissan SR20DET valve cover on the intake side and replaces the PCV valve with a high flowing vent-to-atmosphere swiveling 10AN male...

Radium Engineering

Radium Engineering Fuel Hanger Fpr Block Off 20-0806

This kit allows decomissioning of Radium built-in pressure regulators in certain Radium fuel pump hangers. This allows the user to convert to a return system if they desire. Check with Radium...

Radium Engineering

Radium Engineering Pump Outlet Adapter Check Valve 10mm Barb 20-0798

Attaches to specific fuel pump outlet barbs. Integrated check valve. 10mm Hose barb male connection. See www.radiumauto.com for more information.

Radium Engineering

Radium Engineering Fuel Line Retaining Kit Mk5 Supra 20-0762

Brackets for holding aftermarket high-flow fuel lines to underside of the GR Supra. Uses all factory mounting locations.

Radium Engineering

Radium Engineering V2 Quick Connect 19mm Male To 10AN Male Straight 20-0758

Adapter fitting clips on to the valve cover vent fitting on the BMW B58 engine and converts to a 10AN male.

Radium Engineering

Radium Engineering V2 Quick Connect 19mm Male To 10AN Male 90Deg 20-0748

This swivel fitting installs into the BMW B58 valve cover found on the A90/A91 GR Toyota Supra. It allows connection of a 10AN hose.

Radium Engineering

Radium Engineering 16mm Sae Male Double Banjo Press-Fit Rb26Dett intake Or Exhaust 20-0739

This fitting presses into the OEM Nissan RB26DETT valve cover and provides large 16mm SAE males for connecting breather hoses.

Radium Engineering

Radium Engineering Distribution Block 12-10-10-10 With Fittings 20-0737

High flow distribution block designed to work with large -10AN and -12AN lines. Can combine three lines into one. Safe for use with alternative fuels. Fittings included.

Radium Engineering

Radium Engineering Quick Fill Dump Can 1.5in Dry Break 20-0697-01

Molded 6 gallon dump can. Compatible with all types of fuel. Includes 1.5" dry-break filler probe and accessories. Semi-transparent white color.

Radium Engineering

Radium Engineering Quick Fill Dump Can Standard Filler 20-0697-00

Molded 6 gallon dump can. Compatible with all types of fuel. Includes standard fill spout and accessories. Semi-transparent white color.

Radium Engineering

Radium Engineering Dump Can Cap Assembly Dry Break 20-0687-01

Drybreak probe assembly and dumpe can cap for use with Radium 6 gallon dump cans.

Radium Engineering

Radium Engineering Dump Can Cap Assembly Standard Filler 20-0687-00

Replacement standard filler dump can cap with fill spout for Radium Engineering 6 gallon dump cans.